0.3-6.5/0.3-4mm Wood Carving Drill Chuck Hang Shank with Flexible Shaft for Electric Grinding Drill

Descriptions:

0.3-6.5/0.3-4mm Wood Carving Drill Chuck Hang Shank with Flexible Shaft for Electric Grinding Drill

 

Specifications:

Features:

- Multi-purpose machine for metal grinding, wood cutting, jade drilling and jade polishing;

- The product uses an electric grinder with a flexible shaft to easily solve pipes, interfaces and corners that were difficult to reach;

- The handle is small and easy to grasp, suitable for fine polishing, engraving and sanding operations;

- Rubber design, light weight, more suitable for long hours of operation;

- The length of the flexible shaft is approximately 890mm, which extends the working range.

 

Note:

Before using the soft shaft, it is best to install the machine first. After running for 15 minutes at low speed, the parts inside will be run-in. There will be a little heat within 1-2 hours after use. After the running-in period, it can be used normally without odor.

 

Instructions:

- When inserting, the bump on the flexible shaft is aligned with the inner notch of the tail of the hanging mill, and then squeezed after pressing;

- Small wrench to tighten the clamping head (clockwise tightening, counterclockwise loosening)

- Replace the hose core: First, unscrew the internal screws with a hexagon socket, then remove the entire shaft to replace.

 

Package Included:

1 Pc x Flexible Shaft / Flexible Shaft with Hang Shank

 

More Details: