10pcs 900M-T Pure Copper Iron Tips Soldering Tips For Hakko Soldering Rework Station Soldering Iron
- Stock: In Stock
- Model: MZ001143
- SKU: MZ001143
- UPC: 681877314201
Copper soldering tips are suitable for lower temperature soldering as they are not plated and prone to oxidation.
This type is super sharp with its points shaped like a needle which is suitable for crafted workmanship with care under low temperature.
Get this set of tips and make your soldering work easier.
These tips are made from copper and not electroplated, easy to tin and diamagnetic, suitable for lower temperature soldering.
It is super sharp type which fits for crafted workmanship, soldering in a narrow space or revising the tin bridge emerging from chip soldering.
Don't leave your iron running for hours and hours if you are not using it. This can make the tip get black oxide cover.
Try to tin the tip as it heats. If you leave it on too long or run it too hot it will burn off the solder and go black again.
These soldering tips are suitable for 936, 937 soldering stations, etc.
Model: 900M-T-I/900M-T-K/900M-T-B/900M-T-3C/900M-T-1.2D/900M-T-2C/900M-T-SK/900M-T-1C
Material: Copper
Color: Copper
Outer Diameter: approx. 6.7mm / 0.26"
Inner Diameter: approx. 4.0mm / 0.16"
Length: approx. 43cm / 16.93"
Package Weight: approx. 36g
Temperature Range: 200-480°
Applicable to: 936, 937 soldering station, etc.
Quantity: 10pcs / bag
For storing used iron tips
Use sponge to clean iron tip.
Wrap them with tin solder.
Turn off the power supply and wait until they cool.
Put iron pen on the iron shelve.
10 x Copper Soldering Iron Tip
(10 models for optionals, 10pcs(The same) in a packages)
