European Standard Upgraded Version DIY Hand Soldering Electric Soldering Iron Tool Soldering Station HY-T12-815P 2 in 1 Electric Soldering Iron

Description:

1. The random power cord pins into the host power outlet, inserted when the direction is correct. 

2. The hot air gun and soldering iron placed in the corresponding hot air gun and soldering iron seat and screw the nut of the air plug. 

Note: the mainframe navigation socket nuts such as loose need to tighten in time 3. The hot air gun and soldering iron plug into the corresponding socket. 

4. Insert the plug into the power socket. 

5. Turn on the power switch.

Features:

1. Soldering iron holder

The soldering iron holder is designed with a full envelope structure, please insert the handle of the soldering iron into the holder after the soldering is completed to avoid accidental burns.

Matching high-temperature cleaning sponge, please fully absorb water after squeezing dry and then put into the front tray of the soldering iron holder, need to pay attention to avoid excessive water, which will accelerate the aging of the soldering iron head and may cause vibration switch malfunction.

2. hot air gun hanging frame

This product with the hot air gun hangers, please choose the appropriate location fixed installation, installation note to avoid the hot air gun mouth direction of flammable materials, it is recommended that the 45 degree upward slant fixed.

3. Handle of soldering iron

Non-original handles cannot be replaced！

This product is equipped with a soldering iron handle using a 6-pole GX16 plug, with anti-dull design, when inserted into the host socket bump and the corresponding position of the handle plug groove to maintain the same.

When installing the soldering iron head, be sure to turn off the state, only need to unscrew the metal sleeve part, the inserted iron head should be in good contact with the temperature probe, and the temperature probe spring under the role of maintaining the floating state.

4. Air Pistol Handle

This product with the hot air gun handle using 8 core GX16 plug, with anti-dull design, when inserted, you need to make the host socket bump and the corresponding position of the handle plug groove to maintain the same. When installing the air nozzle, be sure to align the air nozzle with the groove on the hot air gun handle tube in the off state and slowly insert it into the bottom and rotate clockwise.

5. Soldering iron head and nozzle

Please use the original iron head and nozzle, non-correct choice of iron head and nozzle may affect the use of experience!

Package Included:

1 X Power Cord

2 X Air Nozzle

1 X Wind Bracket Gun Holder

1 X PX8150 Handle

1 X Soldering Iron Stand, The

1 X Hot Air Gun Handle

1 X WY815p Mainframe

Detail Pictures: