IT-PS1 Pro 220V 50HZ Intelligent Screen Solar Pure Sine Wave Power Inverter 2200W/3000W/4000W/5000W/6000W/7000W DC 50HZ 12V/24V To AC 220V Converter

Feature:

1.High-pre-cision circuit board.

2.Built-in intelligent control chip.

3. 6000W Peak Dual AC Output. Provide 6000W peak DC to AC power with 2 AC outlets, fully applicable for appliance under 6000 watts.

4.Universal three-hole socket, strong compatibility,most appliances are suitable.

5. Pure Sine Wave Inverter. Greater drive capability, better protection to sensitive equipment. Smart filter, no interference on the electrical, to protect electrical appliances.

6.Up to 93% conversion rate, reduce the conversion loss of 30%, increase 30% continuous power.

7. Multiple Protection. Built-in primary fuse and safe charging technology to protect your battery and devices.

8. Smart Temperature Control. 

     -Cooling fans automatically start when the temperature exceeds 45℃ to prevent the inverter from overheating to extend the life of the inverter.

     -Alloy shell, light weight, good thermal conductivity, can quickly reduce the temperature of components, work long hours are not affected.

9. Multifunctional Digital Display. Color LCD screen integration. Can display the remaining battery capacity, input voltage, output voltage and load power.（Note:2200W one only displays the DC input）

10. Audible alarm. Once any protection of the inverter is triggered, the inverter immediately disconnects the power supply and the load enters a protection mode and reminds people through a buzzer reminder.

11.50Hz/60Hz Frequency Adjustable. Easily switch between 50Hz and 60Hz by pressing the button after power-on.

Specification:

Correct Connet Way:

POSITIVE FROM THE BATTERY TO POSITIVE  OF INVERTER and  NEGATIVE FROM THE BATTERY TO NEGATIVE OF THE INVERTER!

(+...connect...+,-...connect...-)

Notice:

1. In case of failure or improper operation, an audible alarm will be triggered and auto power off. 

2. Cooling fans automatically start when the temperature exceeds 45℃ to prevent the inverter from overheating.

3. The inverter voltage must be the same as the battery voltage

4. Before connecting the battery, make sure that the switch of the inverter is turned off

5. For security, the power of electrical appliances should be lower than the rated power of the inverter.

6. Product production setting is 50Hz, which can be adjusted to 60Hz.

7. Thanks for buying our new product，if you have any question please contact us or writing a review.