Other Instruments

Type A:  1.8-55MHz Automatic Antenna TunerFeatures:- 0.96-inch OLED display- Frequency 1.8-55 MHz- Power supply voltage range: 10-15V DC​- With Lithium battery  - Maximum current consumption: 300 mA- Maximum working power: 100W- Maximum possible measured power: 150W- 1W: It is necessary to start set..

>>Please Contact us to Download the English User Manual<<Note: the product needs to be assembledFeatures:Adopt PIC16F1938 MCU and 7 LC combinations were used.Adopt 7 hollow inductors design, and adopt 6 kV, high voltage ceramic chip capacitor.Adopt SMI-12V,..

Description:GitHub: https://github.com/threeme3/QCX-SSB/tree/feature-rx-improvedSize: 38*88*155mm(Aluminum case)Standby current: 13.8vdc 80--90maFull HF reception, commonly used 6-band transmission design:80m/40m/20/17m/15m/10mNOTE:13.8v power supply:Frequency below 10M 3-10W is normalThe frequency ..

Features:  1. Made of 304 stainless steel, it is safe, durable, easy to clean, and designed for long-lasting use.2. Quality wind leaf, improve cooling effect.3. Ideal for distilling water and alcohol.4. Suitable for hospitals, dental clinics offices, homes, etc. Specifications..

Product Performance:1. Measurement frequency range: 50KHz-4400MHz;2. RF output power: adjustable from -12dbm to -42dbm (step 1db) (error in the whole frequency band: plus or minus 1db);3. Frequency accuracy: ±1ppm, ±5KHz >140MHz4. S21 dynamic range: 90dB (below 2GHz), 75dB (4.4GHz) (25 times averag..

Features:1) FM, AM (MW and SW) and SSB (LSB and USB);2) Audio bandwidth filter 0.5, 1, 1.2, 2.2, 3 and 4Khz;3) 22 commercial and ham radio bands pre configured;4) BFO Control; and5) Frequency step switch (1, 5 and 10KHz);Specification:Use a 3.6V lithium battery 1000MA（only for Assembled version）Sup..

Description:NanoVNA-F V2 portable vector network analyzer is a new product developed on the basis of NanoVNA-F. It uses a 4.3-inch IPS LCD display and an aluminum alloy case. It is equipped with a 5000mAh large-capacity lithium battery as standard. Support touching screen and side button operation, ..

Features:Bulit-in Calibration Signal Generator: When not doing spectrum analyzer, it can be used as signal generator with two frequency outputs,MF/HF/VHF sinus output for 0.1MHZ-350MHz and UHF square waves output for 240MHz-960MHz. It is used for automatic self test and low input calibration.Input F..

ATS25X1 is an upgraded version of ATS-25+.The upgraded version adds the following 5 functions.1. Spectral scanning function2. Backlight adjustment3. Backlight off4. Battery voltage5. Battery percentageDescription:This all-band radio receiver with powerful functions, with 2.4inch touching screen for ..

Features: This CZE-T200 0-0.2w FM transmitter  is a newly designed model featured by portable size,high quality, long broadcasting range and stable performance. It had 4 levels of power output, powered by 1000mah li-on battery. The maximum working time is 12hours at the lowest power level.  It..

Specification: Model   MC8041 MC8042 Operating Voltage   Built-in lithium ion (5000mAh) battery Built-in lithium ion (5000mAh) battery Working electric current  ..

Description:Model Number: A-80SApplicable Fibers: SM(G.652&G.657), MM(G.651), DS(G.653), NZDS(G.655), and self-definded optical fiber typesAverage Splice Loss: 0.02dB(SM), 0.01dB(MM), 0.04dB(DS/NZDS)Return loss: Over 60dBTypical Splicing Time: 9 SecondsTypical Heating Time: 26 Seconds(configurab..